This is the same pump seen all over the web. 100% biodiesel compatible.

 Great for your 6 inch diameter Dry Wash Tower. A very reliable low pressure metering pump.

This particular pump is rated at 9.9 gph and 30 psi max pressure.

Features:

• All ball bearing, permanently lubricated gear motor for smooth,       quiet, powerful operation.
• Double-ball inlet and outlet cartridge type ceramic check valves. Chemical resistant PVDF valve body and fitting, ceramic balls, Viton static seals and TFE/P ball seat o-rings.
•  No metal springs are used.
•  Outputs to 237 GPD.
•  Output pressures to 30 PSI.
•  125 strokes per min.
•  Teflon coated EP diaphragm.

•  Durable metal epoxy coated construction.
•  PVDF suction (foot) valve with Viton and TFE/P o-rings, ceramic check ball and removable polypropylene filter screen.
• Includes 1/4” ID suction and discharge tubing, Injection fitting with spring-loaded check valve and all mounting
Specifications:

Max. working pressure:...........30 psi
Max. fluid temperature: ..........130 F (54 C)
Max. ambient temperature: .....14 to 110 F/ -10 to 43 C
Maximum viscosity:................1,000 Centipoise
Maximum suction lift: .............10 ft. Water 0 psig
Output adjustment range:........4-100% stroke length
Duty cycle:..........................Continuous
Enclosure: ...........................NEMA type 1, (IP20)
Voltage (amp draw): ..............115VAC/60Hz, 1ph (.74 amp max)
Power Connection: .................Junction box for field wiring

Viton Coated Diaphragm

Bullet valve for the 9.9 gph metering pump.If you loose the ceramic balls the pump will not operate without these new valves.  They come in a 4 pack.

• Powerful
• Durable
• Long Lasting

T 56 represents the results of a careful analysis of the requirements connected with transferring and distributing Diesel fuel.
These self-priming rotary vane pumps feature a mechanical seal that guarantees constant reliability, even in low temperatures.
Compact, safe and dependable, they can be used for equipping fuel pumps, stationary fuel-transfer installations and processors

Technical Features

• 110V 60 Hz  • 18 GPM

• Cast-iron pump casing, treated against corrosion and paint-finished.
• Vane pump with sintered steel rotor and acetalic resin blades.
• Mechanical seal.
• Bypass valve built into pump casing.
• In-built 100-micron filter, easily accessible for cleaning.
• Induction motor with aluminium casing.
• Grade of protection: IP 55.
• Continuous running.
• 1"NPT threaded female joints on pump casing. Flanged joints available on request

This pump is very nice. Very powerful and made in Italy.

• Good for Biodiesel
• Reinforced Rotor very good for Waste Vegetable Oil (WVO)
•              
                         
  

 Connect to your own Diesel-gas or electric motor.

Connect to yorn diesel, gas or electric motor